IPv6 Error Alarm
acIPv6ErrorAlarm
|
Alarm |
acIPv6ErrorAlarm |
||||||||
|---|---|---|---|---|---|---|---|---|---|
|
OID |
1.3.6.1.4.1.5003.9.10.1.21.2.0.53 |
||||||||
|
Description |
The alarm is sent when there is an issue with an IPv6 Interface in the IP Interfaces table. |
||||||||
|
Default Severity |
Critical |
||||||||
|
Source Varbind Text |
System#0/Interfaces#<n>. |
||||||||
|
Event Type |
operationalViolation |
||||||||
|
Probable Cause |
communicationsProtocolError |
||||||||
|
Severity |
Condition |
Text |
Corrective Action |
||||||
|
Critical |
Invalid IPv6 address configured in the IP Interfaces table (already exists). |
"IP interface alarm: IPv6 configuration failed, IPv6 will be disabled." |
Note: The alarm remains in Critical severity until the device restarts (a Clear trap is not sent). |
||||||
|
Major |
When the IP Interface is configured in the IP Interfaces table for dynamic IPv6 addressing (i.e., 'Interface Mode' configured to IPv6 Stateless or IPv6 DHCP) and no IP address is received within 10 seconds. |
"Dynamic address not exist, no response from server" |
Check that the server is online. |
||||||
|
Cleared |
A valid IPv6 address is configured, or an IPv6 address is received for dynamic IPv6 addressing, or the IP Interface is deleted. |
- |
- |
||||||